Chemical Range
If the surface being worked requires a super hard, supremely polished and fully sealed surface, you can select from a range of chemical treatments to provide that superb result.
A complete range of chemicals are available for all applications, packaged in 5 or 20 litre packs, or can be supplied in bulk if required. Click Here for the TraxxFloor Process
traxx grout
TraxxGrout is a premixed material primarily designed to assist in the filling of small holes and cracks in concrete floors. The TraxxGrout is applied to the surface being ground, causing a mild reaction with the concrete. This generates a slurry that is then reground back into the surface, thus providing the filling of the voids. Approximate Coverage is 25M2 per 5Ltr.
BUY HERE
Click here for TraxxGrout MSDS
traxx grout-plus
TraxxGrout-Plus is a 100% concentrated version of TraxxGrout and allows the applicator to mix the desired strength to enable a quicker reaction with the surface, where required. TraxxGrout is an integral part of the complete polished floor process.
BUY HERE
Click here for TraxxGrout-Plus MSDS
traxx hard
TraxxHard is a silica based material that reacts with the concrete being polished or treated, to provide a significant increase in density, thus hardness of the surface. This in turn allows for a much higher level of gloss finish to be achieved on the worked surface.
BUY HERE
traxx seal
TraxxSeal is a premium grade surface impregnator that inhibits the ingress of most materials that are likely to stain the surface.
BUY HERE
traxx seal-plus
TraxxSeal-Plus is the Super Premium impregnation sealer that provides a virtually impenetrable barrier to almost all materials that could possibly stain the surface being treated. Ideal for all types of concrete and masonry. TraxxSeal-Plus is normally applied as the final step in the polishing process.
BUY HERE
Click here for TraxxSeal-Plus MSDS
Traxx Traxx Lithium Plus Hardener LHE
Traxx LHE - Lithium Extreme hardener enhance sealer - forms a stable high ratio, low viscosity solution. Once dried, Traxx LHE is relatively insoluble compared to other potassium and sodium based silicates. Refractoriness: Lithium Silicates have higher melting points and may change the refractory properties ofsodium & potassium silicates. Adhesion: Addition of Lithium Silicate to sodium or potassium silicates may improve the adhesion to variousdifferent surfaces. LHE Applications: Concrete surface treatment, Concrete admixture, Coatings, usually as part of the binder system, Welding rod binder additive, Refractory applications, Flame retardant, Ceramics, glazes
BUY HERE
Features
Click to enlarge images
Traxx Grout
Traxx Grout-Plus
Traxx Hard
Traxx Seal
Traxx Seal-Plus
Traxx Seal-Outdoor
