Ventilation Chainsaws
Designed to prevent vapor locking in High heat situations these saws are air injected with a pure foam air cleaner that is impossible to plug - even in a heavy concentration of smoke. They develop over 6 HP & reach chain speeds of 121.6 ft. per second. This allows the chain to use a filing action rather than ripping & tearing.
Ventilation Saw Features
ET Series Engine (Extreme Torque)
High performance engine reduces fuel consumption up to 20% and emissions up to 60%. The saw produces up to 20% more horsepower than stock increasing torque over a wider RPM range when ventilating a roof or cutting/felling trees. The ET Series gives more power throughout the cut.
Ram Jet, Forced Air Injection
The specially designed flywheel removes 97% of debris from the air with centrifugal force and provides 35% more airflow around the engine than standard flywheels. The clean air is channeled to the carburetor housing, pressurizing it through force injection. The end result is higher performance, better air filtration, and a longer lasting and cooler running saw.
Superior Air Filtration Technology
The ventilation series saws combine the Ram Jet, Forced Air Injection System with a pure foam air filter, allowing 300% more airflow for heavy smoke and low oxygen environments. A pure foam air filter will not plug up in heavy smoke like paper or nylon filters.
Two Mass System
Ergonomically designed handles with, optimum spacing and an anti-vibration system minimize fatigue and provide an unsurpassed operator experience. The two-mass system isolates the saw's handles from the engine and cutting arm with steel springs, minimizing vibration transferred back to the operator. The weight of the saw is balanced evenly between the two handles.
Eliminator - Air Purge
The Eliminator air purge system removes air from the fuel lines, allows for faster starting and better performance. Fuel lines are alcohol resistant.
Hyper-Volt : Electronic Ignition
The smart brain of the Hyper-Volt electronic ignition senses when the saw is under load and advances the voltage to maintain higher performance through the cut.
- Stainless Steel Muffler Guard
- Advanced 2-Stage Air Filtration System
- .404 .063 Heavy Duty Carbide Chain
- Replaceable Sprocket Nosed Guide Bar
- Inertia Activated Chain Break
- Insulated Full Wrap Handle
- Combined Choke and Throttle Lock
- Dual 2 X 2 Transfer Ports
- Side Chain Tension System
- Carburetor Vapor Lock Isolation
- Automatic Adjustable Oil-er
Testimonials
Yesterday we had the opportunity to use the new saw in some pretty adverse fire conditions and it performed very well. We used it to cut a hole in almost no visibility smoke conditions and it never missed a beat. It was used until it had a total of sixteen missing teeth, it still cut very well. We put almost 2 tanks of fuel through it on the Gardner fire. A few hours later and it again worked well in extreme smoke conditions on 9th. We were on the third floor in near zero visibility and it started and performed well. It is my hope that we purchase these to replace all our Cutters Edge saws.
-Corey, SFD
Technical Data
| Cylinder Displacement | 74 cc (4.5 cubic inch) |
| Horsepower | 6.5 HP |
| Noise Level | 104 dB(A) |
| Fuel Tank Volume | 1.62 US Pint |
| Oil Tank Volume | .84 US Pint |
| No Load RPM | 13,500 |
| Weight Without Bar or Chain | 13 lbs. |
Features
Click to enlarge images
