Rellok RSP90 Bevelling Machine

 

Uses two diamond bevelling discs to bevel joints up to 30 mm wide.

 

« Previous Product

Rellok RSP90 Bevelling Machine

Rellok RSP90 Bevelling Machine

 

Before the sealing can be poured into the joint, the edges of the joint have to be chamfered. This prevents the joint edges from breaking off under the load of traffic. For this job we offer the RSP90 bevelling machine to professional contractors. This machine uses 2 diamond bevelling discs to bevel joints up to 30 mm wide.

The Honda GX-390 petrol engine with cyclonic air filter transmits its power to the cutting shaft directly via V-belts. Tools are attached from the right side.

During operation the RSP90 moves on rollers which are in line with the cutting shaft. This ensures a smooth bevel depth even on uneven surfaces. A handcrank adjusts the height of the roller guide to set the bevelling depth. A scale indicates the cutting depth.

 

An additional linkage with bottom rollers allows the machine to travel between two joints. It raises the roller guide off the ground and is controlled by the hand crank within the operator’s reach. This maintains the bevel depth when moving