Dust Boss 60 Biggest

THE INDUSTRY LEADER - The Dust Boss-60 is built to handle the toughest jobs. As the flagship model of our product line, this unit can blanket up to  21,000 square feet with dust- and odor-attracting water particles, ranging in size from 50-200 microns, the optimal size for agglomeration of particles. The Virtual Dust Barrier™ created by this ultra-fine mist will help eliminate the dust and odor contaminating your work site.

« Previous Product :: Next Product » Download Download PDF

Dust Boss 60 Biggest

Dust Boss 60 Biggest

 

WATER JET NOZZLES

30 brass nozzles. Stainless steel and nylon nozzles are also available.

REAR VIEW OF DB-60

Stainless steel protective guard.

JACK SUPPORT

Provides stabilization of unit.

BALL VALVE

Allows infinite adjustment of water usage.

PREFILTER SCREEN

10 micron prefilter screen.

TURNTABLE GREASE ZERK

Grease zerk on turntable.

WINTERIZE BOOSTER PUMP

Winterization of booster pump.

BOOSTER PUMP

10 HP, high-pressure booster pump with no lift; increases PSI by 150.

MISTING RING BALL VALVE

Ball valve provides variable flow control.

CONTROL PANEL 

User-friendly control panel with three buttons: Fan on/off, Booster Pump on/off, and Oscillator on/off.

VERTICAL PITCH JACK

Adjust from 0-70°. 

PREFILTER

Axial view. 1-½" quick cam release.

MISTING RING GREASE ZERK

Grease zerk on misting ring lead hose.

WINTERIZE MISTING RING

Winterization of misting ring

GENERAL SPECIFICATIONS

  • 30,000 CFM (849.5 CMM) generated by fan.
  • 21,000 square feet (1,950 square meters) coverage.
  • Oscillator gives 0-40 degrees of movement.
  • Adjustable angle of throw 0-50 degrees of height adjustment.

DIMENSIONS

  • 6.83 feet wide (2.08 meters)
  • 9 feet long (2.7 meters)
  • 6 feet tall (1.8 meters)
  • 1600 lbs. (725.7 Kilograms)

ELECTRICAL SPECIFICATIONS

  • U.S.: 3 Phase / 25 HP fan / 480 Volt / 60 Hertz. Full load current is 46 amps. 60 Kw gen set is recommended.
  • Other motor options available, including all international electrical motors:
  • 380 Volt / 3 Phase / 50 Hertz
  • (Europe, Middle East, N. Japan, Latin America)
  • 400 Volt / 3 Phase / 50 Hertz
  • (Japan, Korea, New Zealand and Australia)
  • 575 Volt / 3 Phase / 60 Hertz
  • (Eastern Canada)
  • Motors are designed with a 1.3 service factor capable of operating at +/- 10% of design voltage.
  • 10 HP (7.5Kw) high pressure booster pump with no lift.
  • 1/8 HP (0.1 Kw) oscillator.
  • 150 foot (46 meters) electrical cord.
  • No male plug, "bare wired" is standard. Any plug is extra cost.
  • UL-Listed cabinet with control panel.

WATER SPECIFICATIONS

  • 10 PSI (0.689 BAR) constant pressure needs to be delivered to booster pump. Maximum water pressure should not exceed 100 PSI (6.89 BAR).
  • Maximum PSI delivered by booster pump is 200 PSI (13.79 BAR).
  • Filter included and should be used for potable and non-potable water. (Filter system in-line 30 mesh 595 micron).
  •  1-1/2" (38.1 mm) cam-and-groove quick disconnect female coupling for fire hose provided on machine.
  • 30 brass nozzles (also available in stainless and nylon).
  • Droplet size 50-200 microns.
  • Throw 200 feet (60 meters)

NOISE LEVELS

  • If you are standing 150 feet away facing the front of the machine, the DBA is 67.
  •  If you are standing 75 feet away facing the side of the machine, the DBA is 65.

CHEMICAL ADDITIVES

  • Can be used with surfactant to improve binding of duct particles.
  •  Odor control chemicals.

MAINTENANCE

  • Fan motor and high pressure pump greased every five years.
  • Oscillator greased for life.

 


Technical Data